Russell 676™ Spray Adhesive is a versatile and effective spray adhesive
glue for a wide variety of substrates for home and industrial
applications. This economical adhesive features a cost-effective 3-way
adjustable valve, for low, medium and high applications. By offering an
option of three lace spray patterns, the 3-way valve eliminates excess
waste, providing just the right amount of adhesive.
Russell 676™ High Performance Spray Adhesive was specially formulated to
bond polyethylene to itself, concrete block, wood and many other
hard-to-bond substrates. It may also be used to bond paper, cardboard,
fabric, urethane foam, foil to metal, and wood to itself.
Whether you need a temporary bond, or a permanent high bond strength
adhesive, from industrial to home applications, "Stick 'em up!" with
Russell 676™ Spray Adhesive. It is certain to save you time, money and
effort.
Russell 676™ High Performance Spray Adhesive was specially formulated
to bond polyethylene to itself, concrete block, wood and many other
hard-to-bond substrates. It may also be used to bond paper, cardboard,
fabric, urethane foam, foil to metal, and wood to itself. Russell 676™
is known for:
Contains no Methylene Chloride
Each can is: 12 Ounce Net Weight
Compare To: 3M 76™, Camie 363™, Bostik™, Seleprene™, Soverign™, and most recognized brands.
Spray Pattern: Lace
Solids: 23%
Bonding Time: At room temperature for both one and two
surface bond, 15 min to several hours depending on the materials,
temperature and humidity
Base: Synthetic resin(s) and styrene butadienecopolymer mixture
Solvent System: Aliphatic (Lexane) and Ketone (Acetone)
Physical and Chemical Resistance: Good resistance to oxidation, moisture and ultraviolet (UV)
Clean-Up: Mineral Spirits
Odor: Strong mint-like when wet; no odor when dry.
Flammability: Extremely Flammable
Heat Resistance: Maximum service temperature of cured adhesive is 130°
Application, Uses and Suggestions:
Hold can 6 to 8 inches away from surface to be sprayed. Depress spray
tip (with arrow pointed away from body) and apply a uniform coating.
For porous substrates applying two coats in the opposite direction of each other will increase bond strength.
For PERMANENT bonding applications, apply a heavy coat to both surfaces.
For TEMPORARY bonds, apply a light coat to one surface only and bond.
Read precautions on the label before using. For best results, apply adhesive at temperatures between 50° and 110°.
When finished, Invert Can and spray over safe area to clear spray tip.
Do not use to bond unsupported vinyls, in high heat overhead
applications.
| Available in store: | Check availability |
Available in store
Close
